Nix System Configuration

This repository manages system configurations for all of my macOS, NixOS, and Linux machines.

Structure

The flake follows the dendritic pattern on top of flake-parts. flake.nix holds the inputs, the concrete host outputs (nixosConfigurations, darwinConfigurations, homeConfigurations), and the perSystem wiring for overlays, devShell, treefmt, pre-commit, and checks. vic/import-tree recursively pulls in every .nix file under ./modules; each one self-registers as a reusable module body (flake.<class>Modules.<name>). Hosts then compose those modules by name.

modules/
├── _lib.nix   # mkAspect helper (underscore-prefixed, skipped by import-tree)
├── shared/    # cross-class option modules + wiring
│               (primary-user, common-base, nixpkgs-wiring, identity, fonts)
├── nixos/     # flake.nixosModules.<name>
├── darwin/    # flake.darwinModules.<name>
├── home/      # flake.homeModules.<name>  (includes assets/ for non-Nix files)
└── profiles/  # identity profiles registered across all three classes

Each module file inlines its body directly — a file like modules/nixos/hyprland.nix both registers flake.nixosModules.hyprland and contains the full compositor configuration. Cross-module references go through config.flake.<class>Modules.<name> so hm.imports = [ config.flake.homeModules.hyprland ] in the NixOS module is how the home-manager side of Hyprland is pulled in when Hyprland is enabled.

Non-Nix assets that aren't flake-parts modules live in secrets/, pkgs/ (custom packages), and modules/home/assets/{dotfiles,nvim,yazi}/ (source-path references for the corresponding home modules).

Overlapping nix-darwin and NixOS

nix-darwin and NixOS share identical shell/user/fonts/packages setup via modules/nixos/default.nix and modules/darwin/default.nix, with shared option declarations (user, hm) and nixpkgs wiring factored into modules/shared/.

Decoupled home-manager configuration

The home-manager configuration is entirely decoupled from NixOS and nix-darwin. All modules live in modules/home/. For each NixOS/darwin host they are pulled in via the flake-parts hm alias (see modules/shared/primary-user.nix), which forwards config.hm.* to home-manager.users.${config.user.name}.*. The same module tree is also exposed as homeConfigurations in flake.nix (fanned out across x86_64-linux, aarch64-linux, and aarch64-darwin) so it is fully usable as a standalone configuration on any Linux or macOS system via the home-manager CLI.

User profiles

User "profiles" live in modules/profiles; these modules configure contextual, identity-specific settings such as SSL certificates or email addresses. Each profile is declared across all three module classes in a single file via the mkAspect helper; currently only personal.nix exists.

Installing a configuration

Non-NixOS prerequisite: install the Nix package manager

curl --proto '=https' --tlsv1.2 -sSf -L https://install.determinate.systems/nix | sh -s -- install --determinate

Skip this step on NixOS, where nix is the package manager by default.

System bootstrapping

NixOS

NixOS hosts are provisioned remotely with nixos-anywhere, which partitions the disk from the host's disko config, builds the system locally and copies it over SSH.

1. Pre-generate the host's SSH host key. sops-nix decrypts secrets with it during nixos-install, and profile-personal's login password lives in secrets/users.yaml (mutableUsers = false, so there is no fallback). Without the key in place at install time the user ends up with no password.

   host=<hostname>
   keys=$(mktemp -d)
   install -d -m755 "$keys/etc/ssh"
   ssh-keygen -q -t ed25519 -N "" -C "root@$host" -f "$keys/etc/ssh/ssh_host_ed25519_key"
   ssh-to-age < "$keys/etc/ssh/ssh_host_ed25519_key.pub"
   

2. Enroll the key in sops. Add the printed age key as &<hostname> under keys: in .sops.yaml, reference it in every creation_rules entry the host needs (at minimum secrets/users.yaml), then re-encrypt:

   sops updatekeys secrets/users.yaml
   git add -A
   

3. Boot the target into a NixOS installer ISO (disable Secure Boot in firmware if it won't boot). The minimal ISO has no NetworkManager; join Wi-Fi with sudo systemctl start wpa_supplicant + wpa_cli. Set a password with passwd, note the IP, and from the provisioning machine:

   ssh-copy-id nixos@<ip>
   

   nixos-anywhere copies these authorized_keys to root and reconnects as root, so key auth is required — a password alone isn't enough.

4. Install. Run from an interactive terminal: disko prompts for the LUKS passphrase over the SSH tty.

   nix run github:nix-community/nixos-anywhere -- \
     --flake ".#$host" \
     --target-host nixos@<ip> \
     --extra-files "$keys"
   rm -rf "$keys"
   

   Add --no-substitute-on-destination if the target has LAN access to the provisioning machine but no internet uplink. The installer ISO is detected, so nothing is downloaded on the target. Check the install output for setting up secrets for users... with no Cannot read ssh key / failed to decrypt errors after it.

5. After first boot, enroll a FIDO2 key for LUKS unlock:

   sudo systemd-cryptenroll --fido2-device=auto /dev/disk/by-partlabel/disk-main-luks
   

Recovering a host that installed without its secrets (e.g. no login password): finish steps 1–2, boot the installer again, and rerun step 4 with --disko-mode mount --phases disko,install,reboot. That unlocks and mounts the existing disk instead of reformatting it (the log still prints "Formatting hard drive with disko"; it only asks for the passphrase once), places the host key and reinstalls.

Darwin / Linux

Clone this repository into ~/.nixpkgs:

git clone https://github.com/kclejeune/system ~/.nixpkgs

Bootstrap a new system by using nh to activate the config:

nix run .#nh -- darwin switch .#kclejeune@aarch64-darwin

nh auto-detects the host and installs nix-darwin or home-manager; override with --darwin or --home-manager if needed.