bitwise

Multi-base interactive calculator and bit manipulator for the terminal.

Convert between bases as you type, flip individual bits by hand, and evaluate C-style expressions — without leaving the console.

bitwise is a handy tool for low level hackers, kernel developers and device driver developers: anyone who spends their day staring at a register dump wondering which bit is set.

• Every base at once — decimal (signed and unsigned), hexadecimal, octal and binary, side by side.
• Interactive ncurses interface — edit a number in any field and watch the rest follow.
• Individual bit manipulation — walk the binary row and toggle bits with the cursor.
• C-style expression calculator — &, |, ^, ~, <<, >>, *, /, %, +, -, with C's precedence.
• Selectable bit width — 8, 16, 32 or 64 bit, switchable on the fly.
• Extras that save a lookup — human-readable sizes (IEC or SI), IPv4 in both byte orders, ASCII and Radix64.

Quick tour

Pass a number and get every representation at once — signed and unsigned decimal, hexadecimal, octal, a human-readable size, Radix64, both IPv4 byte orders, and a labelled bit grid:

Or pass a whole C-style expression and let bitwise evaluate it first:

Run it with no arguments for the full-screen interactive mode.

Installation

Platform Install Debian / Ubuntu 20.04+ sudo apt-get install bitwise Fedora sudo dnf install bitwise openSUSE zypper install bitwise Void sudo xbps-install -S bitwise Arch AUR package Snap sudo snap install bitwise Nix nix-env -i bitwise macOS (Homebrew) brew install bitwise macOS (MacPorts) sudo port install bitwise Buildroot / Yocto In-tree; see their docs Windows From source, under mingw or msys2 Ubuntu older than 20.04 sudo add-apt-repository ppa:ramon-fried/bitwise sudo apt-get update sudo apt-get install bitwise

Command line mode

In command line mode, bitwise calculates the given expression and prints the result in all bases, including the binary representation.

The base is detected from the prefix of the input: 0x/0X for hexadecimal, a leading 0 for octal, b for binary, and everything else is decimal. IPv4 addresses are parsed too, and are reported in both network and reversed byte order.

An expression starting with a minus sign would be taken for a command line option, so separate it with --:

bitwise -- '-5'

Interactive mode

bitwise starts in interactive mode if no command line parameters are passed, or if the -i | --interactive flag is given. Input a number, manipulate it, and watch the other bases change as you go — including individual bits in the binary row. Press F1 for the help screen.

Navigation

Operations

[!WARNING] When changing the bit width, the number is masked with the new width, so you might lose precision. Use with care.

Expression calculator

Enter the expression calculator by typing : (just like in vim), and leave it with ESC. Anything you type there is evaluated; the result is printed in the history window and also shown in binary and the various bases at the top.

Operators

The expression syntax is a subset of C, plus Verilog's bit select (below). These operators are supported, in order of precedence, tightest binding first:

Parentheses group as usual, and multiplication can be written implicitly: 2(3) and (2)(3) both give 6.

This is the same ordering a C compiler uses, so an expression lifted out of source evaluates to the same thing here.

One difference from C: &=, ^= and |= are accepted, but there is nothing to assign to, so they evaluate exactly like &, ^ and |.

Not supported: comparison and equality (< > <= >= == !=), logical && and ||, the ternary ?:, and exponentiation.

Verilog bit select

Fields can be pulled out with Verilog's notation, the same way a datasheet writes them:

bitwise '0x875423[31:23]'
bitwise '0x875423[15]'

The field comes back right-aligned, as it does in Verilog and as a datasheet means it — not masked in place. So 0xdeadbeef[31:16] is 0xdead, not 0xdead0000, and reading a field no longer means working out its mask by hand:

0xdeadbeef[31:16]        instead of      (0xdeadbeef >> 16) & 0xffff

The indices are ordinary expressions, so v[15 + 16:16] works, and a slice is itself a value, so it can be sliced or combined further. Both indices must fit the 64-bit value and msb must not be below lsb; anything else is reported rather than quietly returning zero.

This is the one place the syntax is not C's — in C, v[3] would be array indexing. It is deliberate, and it is the notation the registers being decoded are documented in.

Bits and the last result

• Refer to the last result with the $ symbol.
• Refer to a specific bit with the function BIT(x).
• Set, clear, toggle or test a bit using $ |= BIT(n), $ &= ~BIT(n), $ ^= BIT(n) and $ & BIT(n).

Commands

Editor integration

Vim and Neovim

vim-bitwise runs bitwise on the number under your cursor, without leaving the editor.

Rest the cursor on a numeric literal and its representations appear beside it. There is also an operator, so <Leader>biw runs bitwise on the word under the cursor and <Leader>bi( on the expression inside the parentheses, plus a :Bitwise command for anything you want to type out. Hexadecimal, binary, octal and decimal literals are all recognised, including digit separators and size suffixes such as 0xFF_u8.

Install it with your plugin manager:

-- lazy.nvim. Not lazy-loaded on a key: the hover is driven by an autocmd.
{ "mellowcandle/vim-bitwise", lazy = false }

" vim-plug
Plug 'mellowcandle/vim-bitwise'

It needs this bitwise binary on your $PATH, which you have already installed if you are reading this. See the plugin's README for configuration and :checkhealth bitwise if anything looks wrong.

Building from source

Prerequisites

• libreadline
• libncurses (with forms)
• libcunit (only needed for testing)

sudo apt-get install build-essential
sudo apt-get install libncurses5-dev
sudo apt-get install libreadline-dev
sudo apt-get install libcunit1-dev

brew install automake
brew install autoconf
brew install readline
brew install cunit
export LDFLAGS="-L$(brew --prefix readline)/lib -L$(brew --prefix cunit)/lib"
export CPPFLAGS="-I$(brew --prefix readline)/include -I$(brew --prefix cunit)/include"

Build

Download the latest release, then:

tar xfz RELEASE-FILE.TAR.GZ
cd RELEASE-DIR
./configure
make
sudo make install

Run the unit tests with:

make check

Contributing

• Install the prerequisites above.
• Fork the repo.
• Run ./bootstrap.sh.
• Follow the building from source section.
• Commit and send a pull request.

See CONTRIBUTING.md for the style, testing and commit conventions patches are expected to follow.

License

GPL-3.0-or-later. See LICENSE.