qwen-image-edit-plus-gguf

• run it with gguf-connector; simply execute the command below in console/terminal

ggc q8

GGUF file(s) available. Select which one to use:

1. qwen-image-edit-plus-v2-iq3_s.gguf
2. qwen-image-edit-plus-v2-iq4_nl.gguf
3. qwen-image-edit-plus-v2-mxfp4_moe.gguf

Enter your choice (1 to 3): _

• opt a gguf file in your current directory to interact with; nothing else

• ggc q8 accepts multiple image input (see picture above; two images as input)
• as lite lora auto applied, able to generate output with merely 4/8 steps instead of the default 40 steps; save up to 80% loading time

• up to 3 pictures plus customize prompt as input (above is 3 images input demo)

• though ggc q8 is accepting single image input (see above), you could opt the legacy ggc q7 (see below); similar to image-edit model before

ggc q7

run it with gguf-node via comfyui

• drag qwen-image-edit-plus to > ./ComfyUI/models/diffusion_models
• *anyone below, drag it to > ./ComfyUI/models/text_encoders
  • option 1: just qwen2.5-vl-7b-test [5.03GB]
  • option 2: just qwen2.5-vl-7b-edit [7.95GB]
  • option 3: both qwen2.5-vl-7b [4.43GB] and mmproj-clip [608MB]
• drag pig [254MB] to > ./ComfyUI/models/vae

run it with diffusers

• might need the most updated git version for QwenImageEditPlusPipeline, should after this pr; for i quant support, should after this commit; install the updated git version diffusers by:

pip install git+https://github.com/huggingface/diffusers.git

• simply replace QwenImageEditPipeline by QwenImageEditPlusPipeline from the qwen-image-edit inference example (see here)

import torch, os
from diffusers import QwenImageTransformer2DModel, GGUFQuantizationConfig, QwenImageEditPlusPipeline
from diffusers.utils import load_image

model_path = "https://huggingface.co/calcuis/qwen-image-edit-plus-gguf/blob/main/qwen-image-edit-plus-v2-iq4_nl.gguf"

transformer = QwenImageTransformer2DModel.from_single_file(
    model_path,
    quantization_config=GGUFQuantizationConfig(compute_dtype=torch.bfloat16),
    torch_dtype=torch.bfloat16,
    config="callgg/image-edit-plus",
    subfolder="transformer"
    )
pipeline = QwenImageEditPipeline.from_pretrained("Qwen/Qwen-Image-Edit-2509", transformer=transformer, torch_dtype=torch.bfloat16)
print("pipeline loaded")
pipeline.enable_model_cpu_offload()
image = load_image("https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/diffusers/cat.png")
prompt = "Add a hat to the cat"
inputs = {
    "image": image,
    "prompt": prompt,
    "generator": torch.manual_seed(0),
    "true_cfg_scale": 2.5,
    "negative_prompt": " ",
    "num_inference_steps": 20,
}
with torch.inference_mode():
    output = pipeline(**inputs)
    output_image = output.images[0]
    output_image.save("output.png")
    print("image saved at", os.path.abspath("output.png"))

run nunchaku safetensors straight with gguf-connector (experimental feature)

• run it with the new q9 connector; simply execute the command below in console/terminal

ggc q9

Safetensors available. Select which one to use:

1. qwen-image-edit-lite-blackwell-fp4.safetensors
2. qwen-image-edit-lite-int4.safetensors (for non-blackwell card)

Enter your choice (1 to 2): _

• opt a safetensors file in your current directory to interact with; nothing else

note: able to generate output with 4/8 steps (see above); surprisingly fast even with low end device; compatible with safetensors in nunchaku repo (depends on your machine; opt the right one)

run the lite model (experimental) with gguf-connector

ggc q0

GGUF file(s) available. Select which one to use:

1. qwen-image-edit-lite-iq4_nl.gguf
2. qwen-image-edit-lite-q4_0.gguf
3. qwen-image-edit-lite-q4_k_s.gguf

Enter your choice (1 to 3): _

• opt a gguf file in your current directory to interact with; nothing else

note: a new lite lora auto applied to q0 and q9; able to generate output with 4/8 steps; and more working layers in these versions, should be more stable than p0 (v2.0) below

• for lite v2.0, please use p0 connector (experimental)

ggc p0

GGUF file(s) available. Select which one to use:

1. qwen-image-edit-lite-v2.0-iq2_s.gguf
2. qwen-image-edit-lite-v2.0-iq3_s.gguf
3. qwen-image-edit-lite-v2.0-iq4_nl.gguf

Enter your choice (1 to 3): _

• opt a gguf file in your current directory to interact with; nothing else

run the new lite v2.1 (experimental) with gguf-connector

• for lite v2.1, please use p9 connector

ggc p9

GGUF file(s) available. Select which one to use:

1. qwen-image-edit-lite-v2.1-q4_0.gguf
2. qwen-image-edit-lite-v2.1-mxfp4_moe.gguf

Enter your choice (1 to 2): _

• opt a gguf file in your current directory to interact with; nothing else

note: ggc p9 is able to generate picture with 4/8 steps but need a higher guidance (i.e., 3.5); if too many elements involved, you might consider increasing the steps (i.e., 15) for better output

reference

• gguf-node (pypi|repo|pack)
• gguf-connector (pypi)