Xet Server

A Go server that is wire-compatible with Hugging Face's real Xet storage protocol — the content-defined-chunking, dedup-first storage layer that replaces Git LFS for large model files on the Hub. Point the real hf CLI (huggingface_hub + hf_xet) at this server and it works: hf upload, hf download, byte-identical round-trips, real BLAKE3 hashing, real xorb/shard binary formats, real LZ4/byte-grouping compression.

This started as a simplified, non-wire-compatible chunking/dedup demo (kept in internal/chunk, internal/manifest, internal/api, cmd/xet for quick manual testing) and grew into a from-scratch, spec-driven reimplementation of the actual protocol — verified end-to-end against a live hf_xet client, with several real wire-format quirks discovered only by capturing and replaying genuine client traffic. See docs/PROTOCOL.md for that story.

Also included: xet-proxyd, a caching pull-through proxy for the real huggingface.co — not just a performance cache, but an offline-resilience layer. Point it at the real Hub, use it like a normal HF_ENDPOINT, and every repo/file it has successfully served once stays servable via hf download/hf upload even after huggingface.co becomes unreachable — including handing its cache directory to a plain xetd as a permanent, disconnected replacement. See Caching pull-through proxy below.

---

Table of Contents

• Features
• Architecture
• Installation
• Usage
  • Run the wire-compatible server
  • Authentication
  • Point the real hf CLI at it
  • Xet Data API + CLI
• Caching pull-through proxy (xet-proxyd)
• HTTP API
  • Interactive API docs (Swagger UI)
• Storage backends
• Testing
• Documentation
• Where this diverges from real Xet
• Troubleshooting
• License
• Contributing
• Acknowledgments & Related Projects

---

Features

• Wire-compatible CAS HTTP API (internal/casserver): xorb upload/fetch, shard upload, file reconstruction with Range-based paging, matching xet-core's own openapi/cas.openapi.yaml — verified byte-identical against a real hf_xet client, for both compressible and incompressible content.
• Hub API shim (internal/hubserver): enough of huggingface.co's Hub REST API (repo create, preupload, xet-{read,write}-token, commit, resolve/HEAD) that the real hf upload/hf download shell commands work against this server via HF_ENDPOINT — including real, independent revisions/branches per repo, not just an implicit main.
• xet-proxyd: a caching pull-through proxy for the real huggingface.co (cmd/xet-proxyd, internal/proxycas, internal/proxyhub, internal/hfclient) — an offline-resilience layer, not just a performance cache: any repo metadata or xorb bytes it has successfully relayed once stay servable even after the real huggingface.co becomes unreachable, and its cache directory is a real xetd data directory a plain xetd can take over directly, no proxy process required. See Caching pull-through proxy.
• Real BLAKE3-keyed Merkle hashing (internal/merklehash): a byte-for-byte port of xet-core's DataHash, verified against xet-core's own published reference vectors — not an approximation.
• Real xorb and shard binary formats (internal/xorbformat, internal/shardformat), each verified against real bytes captured from a live hf_xet upload, including the footer-less upload behavior real clients actually use (see docs/PROTOCOL.md).
• From-scratch LZ4 decoder and ByteGrouping4 codec (internal/lz4, internal/bg4): written directly from the public LZ4 spec / verified against a third-party reference implementation, so chunk hashes can be independently re-verified regardless of compression scheme.
• Pluggable, streaming storage (internal/storage): a Store interface with filesystem (fsstore) and S3-compatible (s3store) backends, built on io.Reader/io.ReadCloser rather than []byte — neither backend ever buffers a full object in memory, so a multi-GB upload/download costs a fixed amount of memory. The S3 backend uses a from-scratch AWS SigV4 signer (internal/sigv4), no AWS SDK dependency. Verified end-to-end with real GGUF model files up to 27.6 GB.
• Zero required external dependencies to build the demo path; the protocol path adds exactly one pure-Go module (github.com/zeebo/blake3), pinned in go.sum.
• Optional storage auto-pruning and request rate limiting (internal/eviction, internal/ratelimit): bounded, observable defense-in-depth for a server left running against untrusted traffic — neither adds a dependency, and both are off unless explicitly enabled. xetd rate-limits uploads only (the expensive local operation there); xet-proxyd rate-limits every route on both ports, since even a read can trigger a real outbound call to the real huggingface.co.
• Optional dedup-hit content verification (internal/storage's VerifyingStore): byte-compares an incoming upload against the stored blob on a dedup hit instead of trusting the content hash alone, bailing at the first mismatch — a hash-collision/corruption safety net, off by default since it roughly doubles I/O on a dedup hit.
• A real global chunk-dedup index and V2 (multi-range) reconstruction (internal/casserver): GET /v1/chunks/{prefix}/{hash} returns the actual shard bytes referencing a queried chunk (the real wire contract, confirmed against xet-core's own client source), and GET /v2/reconstructions/{file_id} returns the multi-range-optimized response shape instead of always falling back to V1.
• Restart-surviving metadata persistence: casserver/hubserver (and, identically, xet-proxyd's embedded copies of each) periodically (and on graceful shutdown) checkpoint their in-memory reconstruction/repo indices to disk as an atomic JSON snapshot — see -snapshot-interval below.
• Real-client regression fixtures: several packages carry testdata/ captured directly from a live hf_xet session, replayed in unit tests — the strongest guard against silently regressing wire compatibility.

Architecture

See docs/ARCHITECTURE.md for the full system diagram (upload/download sequence diagrams, package responsibility table, and the key design decisions). Short version:

• cmd/xetd runs the CAS server, and — with -hub-addr — the Hub API shim as a second HTTP listener, matching how huggingface.co's real Hub and CAS are actually separate services.
• cmd/xet-proxyd runs a caching pull-through proxy in front of the real huggingface.co, on the same two-port shape as xetd — a drop-in alternative for the same ports, backed by the real Hub instead of being the only copy of the data. See Caching pull-through proxy.
• cmd/xet is a small CLI for the Xet Data API only (not the wire-compatible protocol — use the real hf CLI for that).

Installation

Prerequisites

• Go 1.27 or later
• GNU Make
• Bash (for integration tests)
• (Optional, for the real hf CLI round-trip test) pipenv, to install huggingface_hub + hf_xet
• (Optional) merman-cli or mmdc (mermaid-cli), to render Mermaid diagrams as SVG in make docs/make docs-serve — falls back to a source + mermaid.live link if neither is available

If pipenv can't reach pypi.org directly (a corporate proxy, an air-gapped environment), copy .env.example to .env and set PIPENV_PYPI_MIRROR to a reachable index mirror; .env is read by make install and is gitignored.

Build

make pre-check   # verify Go/bash are present
make build       # -> bin/xetd, bin/xet-proxyd, bin/xet

Usage

Run the wire-compatible server

# CAS server only, on :8420
./bin/xetd -addr :8420 -data ./xet-data

# CAS server + Hub API shim (needed for the real hf CLI), on :8420 / :8421
./bin/xetd -addr :8420 -hub-addr :8421 -data ./xet-data

# With storage auto-pruning (evict least-recently-used xorbs over 10GB,
# checked every 5 minutes) and per-source-IP upload rate limiting (5
# requests/sec sustained, burst of 20) — both optional, both off by default:
./bin/xetd -addr :8420 -data ./xet-data \
  -max-storage-bytes 10737418240 -eviction-interval 5m \
  -rate-limit-rps 5 -rate-limit-burst 20

# With dedup-hit content verification (see "Storage backends" below) and
# a faster persistence checkpoint interval than the 1-minute default:
./bin/xetd -addr :8420 -data ./xet-data -verify-dedup -snapshot-interval 15s

Opening either port's root path (http://localhost:8420/ or, if -hub-addr is set, http://localhost:8421/) in a browser shows a landing page listing every endpoint that port serves — useful for orienting yourself without needing to read this README first.

Authentication

By default xetd enforces no authentication at all — any client can read and write, matching this project's behavior prior to v0.8.0. Passing -auth-token <secret> (or, preferably, setting $XETD_AUTH_TOKEN) requires every request to carry Authorization: Bearer <secret>, split into read/write scope per endpoint (uploads/commits need write; downloads/ reconstructions/resolve need read) the same way real Xet/HF Hub tokens work. -auth-token None (the default) or leaving it unset disables enforcement entirely.

export XETD_AUTH_TOKEN="a-long-random-secret"
./bin/xetd -addr :8420 -hub-addr :8421 -data ./xet-data

./bin/xet push -server http://localhost:8420 -auth-token "a-long-random-secret" ./model.safetensors
# or, equivalently, export XET_AUTH_TOKEN (or HF_TOKEN, the same variable
# the real `hf` CLI reads) instead of passing -auth-token:
export XET_AUTH_TOKEN="a-long-random-secret"
./bin/xet push -server http://localhost:8420 ./model.safetensors

Prefer the environment variable over the flag ($XETD_AUTH_TOKEN / $XET_AUTH_TOKEN) whenever the machine is shared or the command runs where its argument list might be logged: a -auth-token flag value is visible to any other local user via ps -ef / /proc/<pid>/cmdline and gets written to shell history, while an environment variable set through a secrets manager, a .env file kept out of history, or read -s is not. An explicit -auth-token flag always takes precedence over the environment variable if both are set, so scripts that need to override a machine-wide/session-wide token can still do so per invocation.

-auth-token/the env vars above configure this project's built-in auth.StaticTokenAuth (server) and auth.BearerCredentialHelper (client) — a single shared secret. Both sides are defined as small interfaces (auth.Authenticator/auth.Principal server-side, auth.CredentialHelper client-side) in internal/auth, so implementing your own (e.g. per-user tokens, JWT validation, mTLS) is a matter of satisfying those interfaces and calling SetAuthenticator/setting client.Client.Cred — no changes to casserver, hubserver, or internal/api required.

Point the real hf CLI at it

export HF_ENDPOINT="http://localhost:8421"   # the Hub shim's address
export HF_TOKEN="anything"                    # ignored unless xetd was started with -auth-token/$XETD_AUTH_TOKEN — see Authentication above

hf upload myuser/my-model ./model.safetensors model.safetensors
hf download myuser/my-model model.safetensors --local-dir ./downloaded
cmp ./model.safetensors ./downloaded/model.safetensors   # byte-identical

You can also drive hf_xet's low-level XetSession Python API directly against the CAS server's own address (:8420 above) with no Hub API involved at all — useful for isolating whether an issue is in the CAS protocol or the Hub shim.

Want to run this as a real, standing mirror rather than a one-off local test? See docs/MIRRORING.md for a full step-by-step guide (securing it, pointing multiple machines at it, troubleshooting).

Xet Data API + CLI

A simple, non-wire-compatible gear-hash-CDC + JSON-manifest API is also available for quick manual testing, mounted on the same xetd process at /v1/upload, /v1/files, /v1/stats — sharing the /v1 namespace with the CAS protocol on a disjoint set of literal paths (internal/api's exported UploadPath/FilesPrefix/StatsPath constants are the single source of truth for these, referenced by both cmd/xetd's route table and internal/client, so the path never drifts between server and client). -server (both flags below are optional) falls back to $XET_SERVER, then http://localhost:8420:

export XET_SERVER="http://localhost:8420"   # optional; -server overrides it per-invocation
./bin/xet push /path/to/model.safetensors
# -> file_id:  2d53223aa33715f0eff757537ed9cf8f
#    chunks:   28 total, 28 new
#    stored:   2000000 bytes (0.0% deduplicated)

./bin/xet push /path/to/model-v2.safetensors   # a near-duplicate checkpoint
# -> chunks:   30 total, 4 new
#    stored:   436017 bytes (81.0% deduplicated)

./bin/xet pull -out ./restored.safetensors 2d53223aa33715f0eff757537ed9cf8f
./bin/xet stats

No per-file ownership/isolation. file_id is the SHA-256 of the uploaded content — this API has no repo or user concept at all, so -auth-token here (if enabled) only gates read/write access to the API as a whole, not per-file: any caller with a valid read-scoped token (or none, if auth is disabled) can fetch any file_id it knows, the same trust model as CAS's own /v1/xorbs/{hash}. File IDs are not secrets and this store is not multi-tenant — don't run it multi-tenant without adding that isolation yourself first.

Caching pull-through proxy (xet-proxyd)

xet-proxyd sits in front of the real huggingface.co and transparently caches everything it relays — not primarily for speed, but for offline resilience: once it has successfully served a repo's metadata or a file's xorb bytes, that data keeps being servable via hf download/ hf upload even if huggingface.co goes down, gets rate-limited, or disappears entirely. It's built by embedding the exact same internal/casserver.Server/internal/hubserver.Server engines xetd uses, rather than reimplementing caching logic separately — so its cache directory is a real xetd data directory a plain xetd can take over directly, with no proxy process running at all (see Offline handoff below).

# Two ports, same shape as xetd: -addr (CAS-facing), -hub-addr (Hub-facing).
# Point HF_ENDPOINT at -hub-addr and the real hf CLI works through it
# end-to-end, same as pointing it at a local xetd.
./bin/xet-proxyd -addr :8420 -hub-addr :8421 -data ./xet-proxy-data

export HF_ENDPOINT="http://localhost:8421"
export HF_TOKEN="anything"   # forwarded upstream unchanged — see below
hf download someuser/some-model --local-dir ./downloaded

Or via make run-proxy (same as above, with ./xet-proxy-data).

Same as xetd, opening either port's root path in a browser shows a landing page ("Xet Proxy Server" / "Xet Proxy Server — Hub API shim") listing that port's endpoints; the CAS-facing port also serves the same offline Swagger UI at /api-docs/ (identical spec — the wire protocol is the same one xetd implements). Note the CAS-facing port can't answer anything about a repo it hasn't seen yet until the Hub-facing port relays at least one real Hub call — see the "bootstrap" note below.

Every request that can't be served from cache is relayed live to the real huggingface.co (-upstream-hub-url, defaulting to https://huggingface.co, falling back to $HF_URL) — the caller's own Authorization header is forwarded upstream completely unchanged (internal/hfclient's pure-passthrough design: this proxy never holds or uses a credential of its own). -auth-token/$XET_PROXYD_AUTH_TOKEN gates access to this proxy itself — a separate concern from the upstream credential entirely.

Any upstream failure — network error, timeout, 5xx — falls back to whatever is already cached, no matter how old, rather than erroring; this fallback is the whole reason the proxy exists. -cache-ttl (default -1, meaning "always try upstream first") controls how long cached Hub metadata (repo-info, tree, xet-token, resolve) is served without even attempting a live refresh; it never affects the CAS byte cache, which is content-addressed and can't go stale by definition. -metadata-call-timeout (default 30s) bounds each individual metadata call so a slow-but-not-dead upstream doesn't hold up the fallback path longer than necessary — it never applies to tree listing, which pages internally within one call and can legitimately take longer for a very large repo.

-no-cache disables all of this — a pure-relay escape hatch (every request goes straight to upstream, nothing is read or written locally) for when you specifically want a stateless relay rather than the default offline-resilient caching mode.

Bootstrap note: the CAS-facing port needs the Hub-facing port to have relayed at least one real request first. Real Xet CAS has no single well-known base URL — each repo's Hub xet-{read,write}-token response hands back a per-repo CAS URL, and the CAS-facing proxy only learns it as a side effect of the Hub-facing proxy relaying one of those calls. A request straight to -addr (a raw curl, or hf_xet's low-level API pointed directly at the CAS port) before ANY traffic has gone through -hub-addr gets 503 upstream CAS URL not yet known. Always drive traffic through HF_ENDPOINT pointed at -hub-addr first — a real hf download/hf upload (or even just one xet-token round-trip) — and the CAS port works for the rest of that process's life, including everything already cached from a previous run.

Rate limiting (-rate-limit-rps/-rate-limit-burst, off by default) gates every route on both ports, not just uploads like xetd's own -rate-limit-rps — a cache-missing read costs a real outbound call to huggingface.co just as much as a write does, so both need the same protection. One shared limiter covers both ports, so a client can't double its effective budget by splitting requests across them.

-snapshot-interval (default 1m) persists both the CAS-facing and Hub-facing caches to -data — using the exact same filenames xetd itself reads and writes (casserver-snapshot.json/ hubserver-snapshot.json), which is what makes the handoff below work at all.

Offline handoff, proving the point

# 1. Cache something while online:
./bin/xet-proxyd -addr :8420 -hub-addr :8421 -data ./xet-proxy-data &
HF_ENDPOINT=http://localhost:8421 hf download someuser/some-model --local-dir ./downloaded

# 2. Stop the proxy (a final snapshot is taken automatically):
kill %1

# 3. huggingface.co is gone / unreachable / you're fully offline now.
#    Point a PLAIN xetd at the SAME data directory — no -upstream-hub-url,
#    no network, nothing but what step 1 already cached:
./bin/xetd -addr :8420 -hub-addr :8421 -data ./xet-proxy-data

# 4. The exact same download still works, byte-identical, forever:
HF_ENDPOINT=http://localhost:8421 hf download someuser/some-model --local-dir ./downloaded-again
cmp -r ./downloaded ./downloaded-again

This isn't a hypothetical — integration-tests/xet_proxyd_offline_handoff.sh runs exactly this sequence (against a local stand-in Hub, so it needs no network access) as part of make integration-test: upload+download through the proxy via the real hf CLI, shut the proxy down, tear down its upstream entirely, start a fresh plain xetd on the handed-off data directory, and download again with nothing else running. This is xet-proxyd's whole reason to exist: a practical path off huggingface.co, not just a faster mirror of it.

HTTP API

Interactive API docs (Swagger UI)

Every endpoint below is also documented as an OpenAPI 3.0 spec (docs/openapi.yaml — hand-authored and verified against the actual handler source, not generated) and served through a fully offline Swagger UI at /api-docs/ on the CAS server's address:

./bin/xetd -addr :8420 -data ./xet-data
open http://localhost:8420/api-docs/   # or just visit it in a browser

"Fully offline" means exactly that: the Swagger UI static assets (third_party/swagger-ui-dist, vendored from the swagger-ui project) and the spec itself are both compiled directly into the xetd binary via Go's embed package (see internal/apidocs) — no CDN dependency, and it works identically on an air-gapped machine.

CAS protocol (wire-compatible, mounted at /v1, /v2)

• POST /v1/xorbs/{prefix}/{hash} — upload a serialized xorb (chunk headers + payloads, no footer — see PROTOCOL.md)
• GET /v1/xorbs/{prefix}/{hash} — fetch raw (possibly compressed) xorb bytes, honors Range
• POST /v1/shards — upload a serialized shard (file/xorb info sections, no footer)
• GET /v1/reconstructions/{file_id} — file → xorb/chunk-range map, honors Range, returns 416 at EOF
• GET /v1/chunks/{prefix}/{hash} — global chunk-dedup lookup: returns the raw bytes of whichever uploaded shard referenced this chunk hash (the real wire contract — a client parses the shard itself), 404 if no uploaded shard has ever referenced it
• GET /v2/reconstructions/{file_id} — multi-range-optimized reconstruction: same underlying terms/byte-ranges as V1, grouped by xorb (one signed URL covering multiple ranges) instead of one entry per term
• POST /v1/telemetry — no-op ack
• GET /v1/storage-stats — eviction policy stats (operator-facing; not part of the real Xet CAS API — see Storage backends)

Hub API shim (mounted on a separate port via -hub-addr)

• POST /api/repos/create
• GET /api/{repo_type}s/{repo_id}/revision/{revision} — repo info at a revision (huggingface_hub's snapshot_download resolves this before a whole-repo hf download)
• GET /api/{repo_type}s/{repo_id}/tree/{revision} — list every file committed to a revision
• POST /api/{repo_type}s/{repo_id}/branch/{branch} — create a branch
• POST /api/{repo_type}s/{repo_id}/preupload/{revision}
• GET /api/{repo_type}s/{repo_id}/xet-{read,write}-token/{revision}
• POST /api/{repo_type}s/{repo_id}/commit/{revision}
• HEAD/GET /{repo_id}/resolve/{revision}/{filename}

Xet Data API (mounted at /v1, alongside the CAS protocol)

• POST /v1/upload?name=<optional> — chunks + dedups the uploaded file
• GET /v1/files/{id} / GET /v1/files/{id}/manifest / GET /v1/stats

Storage backends

internal/storage.Store is the abstraction both casserver and the Xet Data API store chunk/xorb bytes through:

• fsstore — content-addressed filesystem directory (the default)
• s3store — any S3-compatible endpoint (AWS S3, MinIO), signed with the from-scratch internal/sigv4 signer. Set XET_S3STORE_LIVE_TEST=1 plus XET_TEST_S3_* env vars to run its tests against a real MinIO instance.

Storage auto-pruning, upload rate limiting, dedup verification, and persistence

All off/on-defaults below; opt in or tune via xetd flags:

• -max-storage-bytes N -eviction-interval 5m — once total xorb storage exceeds N bytes, a background sweep (internal/eviction) deletes least-recently-accessed xorbs (upload or fetch both count as access) until back under budget, skipping any xorb with a fetch currently in progress. GET /v1/storage-stats reports the configured budget and cumulative evictions/bytes freed. A client that later needs an evicted xorb must re-upload it — real Xet clients already treat CAS storage as non-permanent and handle this by re-deriving from the source file. Off by default.
• -rate-limit-rps N -rate-limit-burst N — caps xorb/shard uploads per source IP via a hand-rolled token bucket (internal/ratelimit, no new dependency). Exceeding the limit returns 429 with Retry-After. Fetch/reconstruction/HEAD traffic is never rate-limited. Off by default.
• -verify-dedup — on every dedup hit (a Put for a content hash that already exists), byte-compare the incoming upload against the stored blob instead of trusting the content hash alone, bailing at the first mismatched byte rather than reading either side in full (internal/storage.VerifyingStore). A mismatch (a hash collision or undetected storage corruption) refuses the write — the original stored blob is never overwritten — and logs at Error, distinct from routine request-failure logging. Roughly 10x slower than the default trust-the-hash path on a dedup hit (a full extra read), which is why it's opt-in, not the default. Off by default.
• -snapshot-interval 1m — how often casserver/hubserver's in-memory reconstruction/repo indices are checkpointed to -data as JSON (an atomic stage-then-rename write, the same pattern the storage backends use), so they survive a restart. A graceful shutdown (Ctrl-C/SIGTERM) always takes one final snapshot first. This is a periodic checkpoint, not a write-ahead log — anything written between two checkpoints is lost on an ungraceful termination (a crash, kill -9, power loss); see docs/PROTOCOL.md's persistence section for the full tradeoff writeup. Set to 0 to disable periodic snapshotting (a final snapshot is still taken on graceful shutdown). Defaults to 1 minute.

Testing

make test               # unit tests, all packages
make integration-test   # bash integration suite against a live server

integrationTests.sh starts one xetd instance (CAS + Hub shim) and runs every script in integration-tests/, with a per-test timeout so a hang doesn't block the suite. integration-tests/hf_cli_roundtrip.sh drives the real, unmodified hf CLI through a full upload+download round-trip — the strongest compatibility check available — and skips cleanly (not a failure) if pipenv/its environment aren't set up. integration-tests/xet_proxyd_offline_handoff.sh proves xet-proxyd's whole reason to exist the same way: real hf upload+download through a running proxy, then the proxy AND its upstream are both torn down entirely and a plain xetd takes over the proxy's data directory directly — the same download must still succeed, byte-identical, with nothing but that directory:

make install             # pipenv --python 3.14 && pipenv install
make integration-test    # now includes hf_cli_roundtrip.sh and xet_proxyd_offline_handoff.sh

See CONTRIBUTING.md for the full test layer breakdown, including why several packages carry real-client testdata/ fixtures, native Go fuzz tests for every wire-format parser, adversarial/chaos tests against a live server, and dedup/hashing/ compression benchmarks.

Documentation

• docs/FAQ.md — why Xet's chunking/dedup model exists at all instead of plain S3/HTTP hosting, why this project exists, why xet-proxyd exists, and other questions worth answering once instead of repeatedly
• docs/MIRRORING.md — practical guide to self-hosting your own model mirror: hf download/hf upload against your own server instead of huggingface.co, step by step, including xet-proxyd's transparent-caching alternative
• docs/ARCHITECTURE.md — system diagram, upload/download sequence diagrams, package responsibility table, design decisions
• docs/PROTOCOL.md — wire-compatibility deep dive: every place the real client's behavior diverges from the documented spec, how each was discovered, and why the fix is correct
• CONTRIBUTING.md — dev setup, test layers, doc-comment conventions, branching/PR conventions
• CHANGELOG.md — release history

Package-level godoc comments are the source of truth for implementation details not covered above:

go doc ./internal/merklehash
go doc ./internal/casserver

make docs regenerates the committed docs/godoc/*.md package reference (via go doc -all) and renders every Markdown doc in this repo to browsable HTML in docs/build/; make docs-serve does the same and then serves it locally. Both are implemented by scripts/build_docs.go (its own Go module, so the main xet-server module keeps zero external dependencies).

Where this diverges from real Xet

Every divergence tracked in prior versions of this doc has been closed: real revisions/branches, V2 reconstruction, a global chunk-dedup index, restart-surviving persistence (all as of v0.7.0), and pluggable authentication/authorization (as of v0.8.0 — see Authentication).

xet-proxyd (new in v0.9.0) has one known, deliberate gap: on a cold start with -hub-addr disabled (or before the Hub-facing port has relayed any traffic), the CAS-facing port has no way to learn the real upstream CAS base URL and returns 503 for anything it doesn't already have cached — see the bootstrap note in Caching pull-through proxy. This is inherent to how real Xet CAS's base URL is discovered (per-repo, via the Hub's own token response, not a fixed well-known address), not a gap this project could close without deviating from the real protocol.

Troubleshooting

Debugging xetd itself

Run xetd with DEBUG=1 to log every HTTP request it receives (method, path, status, duration) plus commit/shard/resolve lookup details at debug level via the standard library's log/slog:

DEBUG=1 ./bin/xetd -addr :8420 -hub-addr :8421 -data ./xet-data

This is the fastest way to see whether a request from hf upload/hf download (or anything else) actually reached the server, and what it did once it got there — see docs/PROTOCOL.md's "How these were found" section for how this was used to track down real bugs. DEBUG=1 ./bin/xet-proxyd ... does the same for the proxy — useful for telling whether a slow/failed request actually reached the real huggingface.co or was served from cache. xet (the CLI client) has no DEBUG flag: it's a one-shot command that already prints its result directly, not a long-running server with request traffic to log.

hf upload/hf download hangs or times out

If you're in a sandboxed/corporate network that proxies all outbound traffic (including localhost), hf_xet's Rust HTTP client may not consistently honor NO_PROXY/no_proxy for localhost, and the upload call hangs. This is an environment limitation, not a xetd bug — the identical upload/download flow works when driven directly against the CAS server via hf_xet's low-level Python API. Try setting NO_PROXY=localhost,127.0.0.1 / no_proxy=localhost,127.0.0.1, or run outside the proxied environment. integration-tests/hf_cli_roundtrip.sh enforces a timeout so this fails visibly instead of hanging the test suite.

Integration tests fail to start the server

The runner picks ports 18420/18421 by default to avoid colliding with a make run-style instance on 8420/8421. Override with XETD_PORT=<port> XETD_HUB_PORT=<port> make integration-test if those are also taken.

make integration-test reports "Operation not permitted" creating temp files

The runner uses $TMPDIR (or /tmp if unset) for all scratch state. Make sure your environment allows writes there.

Chunk counts differ between two very similar files more than expected (Xet Data API only)

The Xet Data API's chunker targets an average chunk size of 64 KiB; edits smaller than that still land inside one chunk boundary, and byte-level insertions can shift downstream boundaries until the rolling hash resynchronizes. Expected content-defined-chunking behavior, not a bug.

License

MIT License — see LICENSE.md for details.

Contributing

See CONTRIBUTING.md for the full guide. Short version:

1. Fork the repository, branch from main
2. make all before opening a PR (format, vet, build, unit tests, integration tests)
3. PR titles follow Conventional Commits
4. If you touch protocol/wire-format behavior, read docs/PROTOCOL.md first

Acknowledgments & Related Projects

This project only exists because of work other people published openly. Thank you to:

• Hugging Face and the Xet team for designing and documenting the Xet protocol this project reimplements, and for xet-core (the real Rust implementation this project is wire-compatible with) — the ultimate source of truth every byte here was checked against.
• jedisct1 for zig-xet, an independent third-party reference implementation used to verify this project's own ByteGrouping4 codec against a second, unrelated source rather than trusting a single implementation.
• zeebo for blake3, the one external Go dependency this project takes on for its main module — a correct, well-tested BLAKE3 implementation is exactly the kind of primitive worth depending on rather than reimplementing (see docs/FAQ.md for why).
• The swagger-ui project, whose static assets (vendored under third_party/swagger-ui-dist, Apache-2.0 — see its own VENDORED.md) power this project's fully offline /api-docs/ UI.
• yuin/goldmark, alecthomas/chroma, and abhg/goldmark-mermaid, which render this repo's own Markdown docs (scripts/build_docs.go, its own module so these never touch the main xet-server module's dependency graph).
• The Git LFS project, for defining the large-file Git workflow that Xet's chunking/dedup model improves on — and for being the widely-understood baseline this README's FAQ compares against.
• Everyone who publishes public specs (LZ4, AWS Signature Version 4, OpenAPI 3.0) clearly enough that a from-scratch, independently-verified implementation is actually possible without access to any reference server's source code.