linux-nvme

This github repository contains:

• NVME kernel patches for linux made by Andy Lutomirski.
  
• PKGBUILD for linux-nvme on Arch maintained by me.
  

These patches enable NVME drives to enter lower power states.
For example: my case (XPS13, linux-nvme4.9.0) it decreases idle usage by ~1.5watt (see Benchmarks file)

NEW INFO: I have built 4.11rc1 and it seems this patch has made mainline!

It seems that the patch to disable SM951 has been merged also:

static const struct nvme_core_quirk_entry core_quirks[] = {
	/*
	 * Seen on a Samsung "SM951 NVMe SAMSUNG 256GB": using APST causes
	 * the controller to go out to lunch.  It dies when the watchdog
	 * timer reads CSTS and gets 0xffffffff.
	 */
	{
		.vid = 0x144d,
		.fr = "BXW75D0Q",
		.quirks = NVME_QUIRK_NO_APST,
	},

5 Ways to install:

1) ARCH manually compile kernels: (EASY/SLOW)

• git clone: https://github.com/damige/linux-nvme.git
• go into /src/[kernel you want]
• type "makepkg" -wait until compilation completes-
• pacman -U linux-nvme-*
• Adjust your bootloader of choice to boot linux-nvme
  

2) non-ARCH/ARCH Patch kernel of choice: (HARD/SLOW)

4.8.x:
Patch using nvmepatch1-V4.patch, nvmepatch2-V4.patch, nvmepatch3-V4.patch.
4.9.x:
Patch using APST.patch, pm_qos1.patch, pm_qos2.patch, pm_qos3.patch, nvme.patch
4.10.x:
Patch using APST.patch

3) ARCH AUR:(EASY/SLOW)

• use AUR helper of choice to install "linux-nvme"
• Adjust your bootloader of choice to boot linux-nvme
  

If you choose to trust me compiling it for you:

4) ARCH REPO: (EASY/FAST)

* Add to your /etc/pacman.conf

[linuxnvme]
SigLevel = TrustAll
Server = http://linuxnvme.damige.net/repo

• Update db and install with:
  

pacman -Sy
pacman -S linuxnvme/linux-nvme linuxnvme/linux-nvme-headers linuxnvme/linux-nvme-docs

My GPG key (for reference) is: A6255D31F80BEC97

• Adjust your bootloader of choice to boot linux-nvme
  

5) ARCH binary download: (EASY/FAST)

• Download: http://linuxnvme.damige.net/kernels/

• Verify sums: https://github.com/damige/linux-nvme/blob/master/compiled/sums

  
  

• install with:

  
  

pacman -U linux-nvme-*

• Adjust your bootloader of choice to boot linux-nvme
  

To test if the APST is working try:

• install nvme-cli and: "nvme get-feature -f 0x0c -H /dev/nvme0" Expected output is: "Autonomous Power State Transition Enable (APSTE): Enabled"

  
  

• Check if "/sys/class/nvme/nvme0/power/pm_qos_latency_tolerance_us" exists

  
  

• Verify measurably lower power usage when ssd is idle

  
  

Known issues:

In the latest patches the samsung SM951 (as used in the XPS 9350) has been disabled for NVME APST. This is due to some reported instability.
I have not included the patch disabling this nvme drive, as i use it myself. Incase you want the full APST patch its listed as APST-FULL.patch

TODO:

• None?